Unpacking; Before Getting Started; Work Instructions - Scheppach AB1600 Original Bedienungsanleitung

• Wear protective gloves.

7. Unpacking

m WARNING!
The device and packaging materials
are not toys! Children must not be al-
lowed to play with plastic bags, film
and small parts! Risk of swallowing
and suffocation!
• Open the packaging and remove the
device carefully.
• Remove the packaging material as well
as the packaging and transport bracing
(if available).
• Check that the delivery is complete.
• Check the device and accessory parts
for transport damage. When complaints
the dealer must be informed immedi-
ately. Subsequent complaints will not
be accepted.
• If possible, store the packaging until the
warranty period has expired.
• Read the operating instructions to make
yourself familiar with the device prior to
using it.
• Only use original parts for accessories
as well as for wearing and spare parts.
Spare parts are available from your
specialized dealer.
• Specify our part numbers as well as the
type and year of construction of the de-
vice in your orders.
42 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

8. Before getting started

Make sure before starting that the data
on the type plate coincide with the mains
specifications.
Always disconnect the power supply be-
fore making any adjustments to the device
• Get to know your machine. Familiarise
yourself with its application and limita-
tions, as well as the specific potential
hazards.
• Make sure that the switch is OFF before
inserting the plug into the socket.
• Make sure that the machine is assem-
bled completely and properly.
• Check the machine before use for
damaged parts and determine whether
these parts work properly and perform
its intended function; in case of doubt,
the part is to be replaced.
• Check the alignment of all moving
parts, broken or mounting parts, and
other conditions that could impair prop-
er operation. Any damaged part should
be repaired or replaced by a qualified
technician.
• Do not use the machine if a switch can-
not be switched on and off correctly..
m CAUTION! Before beginning the op-
eration, check the installation site for con-
cealed electrical cables, gas and water
pipes using a pipe locator.

9. Work instructions

• Use only proper equipment.
• Make all machine adjustments only with
the machine switched off.