Supplement: Configuration With Win10 - TLS ELECTRONICS QuickControl XL Installations- Und Bedienungsanleitung

Installation and user manual

Supplement: Configuration with WIN10

In order to install the USB device driver of the QuickControl XL under
WIn10, a few points must be observed:
Win10 should be updated
The drivers for the motherboard should be updated
The BIOS should be up to date
The Secure Boot function must be deactivated in the BIOS
Then open the command prompt (Powershell) as administrator and
execute the following commands:
Process both commands one after the other.
BCDEDIT –Set LoadOptions DDISABLE_INTEGRITY_CHECKS
BCDEDIT –Set TESTSIGNING ON
This ensures that the USB driver can be installed. After a restart, the
driver can now be installed.
Stand 03/21 59