IKEA FWM6 Handbuch Seite 21

ENGLISH
The filter is inserted correctly when the
indicator on its top is visible and
blocked.
Cleaning the water inlet filters
If the appliance takes long to fill with water
or doesn't fill, the starting button indicator
light blinks in red. Check if the water inlet fil-
ters are blocked (see chapter "What to do
if..." for more details).
Proceed as follows:
• close the filter
cover;
• insert the mains
plug again.
1
2
• Unscrew the hose from the appliance.
Keep a rag nearby because some wa-
ter may flow.
• Clean the filter in the valve with a stiff
brush or with the piece of cloth.
3
35° 45°
21
• Turn off the water
tap.
• Unscrew the hose
from the tap.
• Clean the filter in
the hose with a
stiff brush.
• Screw firmly the
inlet hose back
onto the tap.
• Screw the hose
back to the appli-
ance turning it to
the left or the
right to suit the
installation. Tight
the locknut cor-
rectly to prevent
water leaks.
• Turn on the water
tap.