Installing And Connecting The Refrigerated Container - Dometic TL200 Bedienungsanleitung

TL, FO
7 Installing and connecting the
refrigerated container
!
WARNING! Health hazard!
• Secure the refrigerated containers in the vehicle in such a way that
they cannot move under any circumstances (e. g. sudden brake,
accident).
– Only for TL200, TL300, TL450: Use the fastening tabs on the
refrigerated containers for lashing the load in the vehicle.
– Only for wheel set DT-25: Use the parking brakes on the
wheels to secure the refrigerated containers.
!
WARNING! Fire hazard!
• When positioning the device, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
➤ Observe the minimum clearances for the place of installation (fig. 6, page 6).
➤ Place the refrigerated container on a stable and even floor.
7.1 Installing the wheel set (DT-25)
Not for FO650NC, FO850NC
You can install wheels in place of the stands (fig. 8, page 7). Use two fixed wheels
and two movable wheels in the longitudinal direction to make maneuvering easy.
!
WARNING! Health hazard!
Lift the refrigerated container with a suitable lifting device (e.g. fork
truck).
I
NOTE Damage hazard!
Do not place the container on its side.
➤ Remove the lower support brackets and keep the screws.
➤ Secure the rollers at the same position of the support blocks with the existing
screws.
➤ Always mount the rollers in pairs at the rear, front or side.
EN

Installing and connecting the refrigerated container

19