Control Elements; Installing And Connecting The Refrigerator - Dometic CoolMatic CRE-Serie Montage- Und Bedienungsanleitung

Installing and connecting the refrigerator

6.2

Control elements

No. in
fig. 4, page 4
1
2
3
4
5
6
7
7 Installing and connecting the
refrigerator
7.1 Safety instructions for installation on boats
Please note the following instructions for installation on boats:
D
DANGER!
If the device is powered by the mains, ensure that the voltage supply has
a residual current circuit breaker.
A
NOTICE!
• The device can be tilted sideways up to 30° for only a short period of
time. When setting up the refrigerator, note that it must be fastened
to take account of this. If you have any questions regarding installa-
tion, consult your specialist dealer.
• Install the refrigerator so that the warm air produced can easily
escape (either upwards or to the sides, fig. 5, page 5).
• The device is designed for ambient temperatures between +16 °C
and +38 °C.
20
Explanation
IR sensor for switching the interior light
Red LED: Fault indication
LED Blue: Compressor is running
LED Orange: Compressor is off
On/off button
Inner lighting
Temperature selection button
LEDs: Temperature levels
CRE
EN