Inhaltsverzeichnis
Werbung
Loading Envelopes
>
Loading Paper
>
Contents
Loading Envelopes
You can print on European DL and US Comm. Env. #10-sized envelope.
The address is automatically rotated and printed according to the envelope's direction by specifying with
the printer driver properly.
Important
You cannot use the following envelopes.
- Envelopes with an embossed or treated surface
- Envelopes with a double flap (or sticker flaps)
- Envelopes with pressure seals
- Envelopes whose gummed flaps are already moistened and adhesive
1.
Prepare envelopes.
Press down on all four corners and edges of the envelopes to flatten them.
If the envelopes are curled, hold the opposite corners and gently twist them in the
opposite direction.
If the corner of the envelope flap is folded, flatten it.
Use a pen to press the leading edge in the inserting direction flat and sharpen the
crease.
The figures above show a side view of the leading edge of the envelope.
Important
The envelopes may jam in the printer if they are not flat or the edges are not aligned. Make
sure that no curl or puff exceeds 0.1 inches / 3 mm.
2.
Load the envelopes.
Loading Paper
> Loading Envelopes
Advanced Guide
Troubleshooting
Стр. 30 из 342 стр.
Werbung
Inhaltsverzeichnis
