Inhaltsverzeichnis
Werbung
Loading Envelopes
(B) Rear side
(C) Address side
Align the envelopes against the right side of the Rear Tray (A) and load it WITH
(1)
THE ADDRESS SIDE FACING YOU.
The folded flap of the envelope will be faced down on the left side.
Up to 5 envelopes can be loaded at once.
Pinch the Paper Guide and slide it against the left side of the envelopes.
(2)
Do not slide the Paper Guide too hard. The paper may not be fed properly.
Set the Paper Thickness Lever to the right.
(3)
Reset the Paper Thickness Lever to the left when you finish printing.
3.
Specify the settings in the printer driver.
Select Envelope in Media Type.
(1)
Select the size for envelopes.
(2)
Select DL Env. or Comm. Env. #10 in Page Size.
Select DL Envelope or #10 Envelope in Paper Size.
Select Landscape in Orientation.
(3)
Important
If you do not specify Page Size (or Paper Size) or Orientation properly, the address will be
printed upside down or will be turned to 90 degrees.
Note
The printer may make operating noise when feeding envelopes.
In Windows, if the print result is upside down, select Rotate 180 degrees on the Page Setup
sheet in the printer properties dialog box of the printer driver.
Стр. 31 из 342 стр.
Page top
Werbung
Inhaltsverzeichnis
