Inhaltsverzeichnis
Werbung
Tips on How to Use Your Printer
Is the paper curled?
The curled paper causes paper jam. Flatten the curled paper, then reload it.
Refer to the "
Troubleshooting
Tip!: After loading paper, be sure to specify the paper settings!
After loading paper, be sure to select the loaded paper in Media Type of the printer driver. If the type of
paper is not selected, you may not be able to get the satisfactory print result.
See
Printing
.
There are various types of paper: paper with special coating on the surface for printing photos with
optimal quality and paper suitable for documents. Media Type of the printer driver has different settings
for each type of paper in advance (such as using ink, ejecting ink, or distance from nozzles) so that you
can print on each paper with the optimal image quality. You can print with different settings in Media Type
suitable for each type of loaded paper.
Use the RESUME/CANCEL button to cancel printing!
Tip!: Never press the Power button!
If you press the Power button while printing is in progress, the print data sent from the computer queues
in the printer and you may not be able to continue to print.
Press the
RESUME/CANCEL
Note
If you cannot cancel printing by pressing the
computer, open the printer properties dialog box to delete the unnecessary print jobs from the
printer status monitor (Windows).
How to maintain the optimal printing quality?
The key to printing with the optimal printing quality is to prevent the Print Head from drying or clogging.
Always follow the following steps for optimal printing quality.
Follow the procedure below to turn the power off.
1 Press the Power button on the printer to turn it off.
2 Be sure that the Power lamp is not lit.
3 Unplug the power cord from the wall outlet, or turn off the extender cable connector.
If you press the Power button to turn off the power, the printer caps the Print Head (nozzles)
automatically to prevent from drying. If you unplug the power cord from the wall outlet or turn off
the extender cable connector before the Power lamp is turned off, the Print Head will not be
capped properly and this will cause drying or clogging.
To turn off the power, be sure to follow this procedure.
Print periodically!
Just as the tip of a felt pen becomes dry and unusable if it has not been used for a long time,
even if it is capped, the Print Head too, may become dried or clogged if the printer has not been
used for a long time.
We recommend the printer to be used at least once a month.
Note
Depending on the type of paper, ink may blur if you trace the printed area with a highlight
pen or paint-stick, or bleed if water or sweat comes in contact with the printed area.
Dose the printer need to be handled with care when storing or
" in the on-screen manual: Advanced Guide
button to cancel printing.
RESUME/CANCEL button while printing from a
Стр. 62 из 342 стр.
.
Werbung
Inhaltsverzeichnis
