Inhaltsverzeichnis
Werbung
Main Components
>
Contents
Overview of the Printer
Main Components
Front View
(1)
Paper Guide
Pinch and slide it to align with the left side of the paper stack.
(2)
Paper Support
Open to load paper in the Rear Tray.
(3)
Rear Tray
Load various sizes or types of paper which you can use on the printer.
Two or more sheets of the same size and type of paper can be loaded at the same time, and fed
automatically one sheet at a time.
Loading Paper
See
(4)
Front Cover
Open it when replacing the FINE Cartridges or removing jammed paper inside the printer.
(5)
Paper Thickness Lever
Switches the clearance between the Print Head and the loaded paper to match the media type.
Note
Position of the Paper Thickness Lever
Set to the right when printing on envelopes or T-shirt transfers.
Set to the left when printing on paper other than envelopes or T-shirt transfers.
For details on the media types and the position of the Paper Thickness Lever, see
Types You can Use
(6)
Paper Output Slot
Printouts are output.
(7)
Power Button
Turns the power on or off.
Important
Disconnecting the Power Plug
When disconnecting the power plug after turning off the power, be sure to confirm that
the
lamp is not lit. If the power plug is disconnected from the wall outlet while the
Power
lamp is lit or flashing, the printer may become unable to print since the Print Head is
Power
not protected.
(8)
RESUME/CANCEL Button
Press to cancel a print job in progress. You can also press this button after resolving a printer error to
> Main Components
.
.
Advanced Guide
Troubleshooting
Media
Стр. 4 из 342 стр.
Werbung
Inhaltsverzeichnis
