Inhaltsverzeichnis
Werbung
Replacing Procedure
>
Routine Maintenance
Contents
Replacing Procedure
When FINE Cartridges run out of ink, follow the procedure below to replace them.
Important
Handling FINE Cartridges
Do not touch the electrical contacts (A) or print head nozzles (B) on a FINE Cartridge. The
printer may not print out properly if you touch it.
To maintain optimal printing quality, we recommend the use of specified Canon brand FINE
Cartridges.
Refilling ink is not recommended.
If you remove a FINE Cartridge, replace it immediately. Do not leave the printer with FINE
Cartridges removed.
Replace empty cartridges with new ones. If you insert FINE Cartridges that have been
removed once, the printer may not print out properly due to some reasons such as clogging of
the nozzles.
Furthermore, with such cartridges, the Low Ink Warning may not appear properly.
To maintain optimal print quality, install FINE Cartridges in the printer within the date indicated on
the package box. And also use up FINE Cartridges within six months after the installation (We
recommend you to put down the date when installing them).
Note
If a FINE Cartridge runs out of ink, you can print with either Color or Black FINE Cartridge, in
whichever ink remains, only for a while. However the print quality may be reduced compared
to when printing with both cartridges. We recommend to use new FINE cartridges in order to
obtain optimum qualities.
Even when printing with one ink only, print with leaving the empty FINE Cartridge installed. If
either of the Color FINE Cartridge or Black FINE Cartridge is not installed, an error occurs and
the printer cannot print.
For information on how to configure this setting, refer to the on-screen manual:
.
Guide
Color ink may be consumed even when printing a black-and-white document or when black-
and-white printing is specified.
Every ink is also consumed in Print Head Cleaning and Print Head Deep Cleaning, which may
be necessary to maintain the printer's performance. When ink has run out, replace the FINE
Cartridge immediately with a new one.
1.
Make sure that the power is turned on, and open the Front Cover.
The FINE Cartridge Holder moves to the replacement position.
Caution
Do not hold the FINE Cartridge Holder to stop or move it forcibly.
Do not touch the metallic parts or other parts inside the printer.
>
Replacing a FINE Cartridge
> Replacing Procedure
Advanced Guide
Troubleshooting
Advanced
Стр. 48 из 342 стр.
Werbung
Inhaltsverzeichnis
