Presetting Stations Manually - Grundig MS 300 Benutzeranweisungen

BLUETOOTH OPERATION _______________________
Note:
• The operational range between this player and
a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth
device and the unit).
• Before you connect a Bluetooth device to this
unit, ensure you know the device's capabilities.
• Compatibility with all Bluetooth devices is not
guaranteed.
• Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
• If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
1 Press the
button on the unit or MODE button
on the remote controll to select BT (Bluetooth)
mode. "NO BT" will show on the display if the unit
is not paired to any Bluetooth device.
2 Activate your Bluetooth device and select the
search mode. "Grundig MS 300" will appear on
FM OPERATION ______________________________
Auto Scan and Save Preset Station
1 Press the MODE button on the unit or on the
remote control to select FM mode.
2 Press the SCAN button on the remote control
to activate automatic programming. All available
stations are programmed in the order of waveband
reception strength.
• The first programmed radio station is played
automatically.
1 Press the
,
previous preset station.
Tuning in a Station
Tune in radio stations automatically
• Press and hold the , buttons on the remote
control, the frequency changes down or up
automatically until a station is found.
• The search may not stop at a station with a very
weak signal.
buttons to select a next /
your Bluetooth device.
• If you cannot find the unit, press and hold the "
" button on the unit or the " " on the remote
control. The system has entered pairing mode.
The unit will show "PAIRING" .
3 Select "Grundig MS 300" in the pairing list.
On successful pairing, the display panel shows
"BT".
4 Play music from the connected device.
Start, pause or resume play.
, Previous track / Next track.
To disconnect the Bluetooth function,
you can :
• Switch to another function on the unit;
• Disable the function from your Bluetooth
device.
• Press and hold the
button on the remote control. The Bluetooth
device will be disconnected from the unit.
Tune in radio stations manually
• Press the , buttons repeatedly until you find
the station you want.
• If reception is still poor, try to adjust the
position of the aerial or try to move the radio
to another location.

Presetting Stations Manually

You can preset up to 40 FM stations.
1 Tune in the desired station, then press the
PROG button.
2 Press the
or number (0 - 9) buttons to
,
select the preset number.
3 Press the PROG button to store the station.
4 Repeat above steps 1 to 3 for each station
you want to store in memory with a preset
number.
button on the unit or the
ENGLISH 41