Resetting Alarms And Errors; Safety Temperature Limiter - Austroflamm Ruby Benutzerhandbuch

english

4.1 Resetting alarms and errors

In the event of an alarm or error, a yellow or red message is displayed giving details.
To close the alarm display, press
Closing the display does not clear the alarm.
To clear the alarm, a solution to the problem must be found.
However, the stove can still be operated in spite of the fact that the
alarm indicator is still displayed.
Close the error display by pressing
Closing the display does not cancel the error.
To clear the error, the problem must be solved.
The stove is not operable when an error is detected.

4.2 Safety temperature limiter

Your stove is equipped with a safety temperature limiter on the back.
This switches off automatically if the stove overheats (temp. ≤ 105°C). If the stove shuts down, the cause must
be determined. To make the stove operable again, push the green reset button once the safety temperature lim-
iter has cooled down.
Safety temperature limiter with un-
screwable, black protective cap
14
.
.