Austroflamm Ruby Benutzerhandbuch Seite 129

COMMISSIONING REPORT FOR "PELLET STOVE"
Operator/Customer
Name
Street
Postcode
Telephone
Email
Pellet Stove
MODEL
Serial number
Technical defects
Visual defects
Accessories (e.g.: SMART SPOT, AIR DISTRIBUTION MODULE,
... )
On-Site Conditions
Socket earthed (see test certificate for electrical
installation)
Firebox door seal inspected
Miscellaneous
Chimney type □ Brick
Diameter of chimney:
Chimney – Approved by chimney sweep: □ Yes □ No
Controlled domestic ventilation: □ Yes □ No
Appliance - Preparation for Start, Function Test
Pellet hopper full
Pellet quality : e.g. Önorm/DIN plus/ENplus A1
"Riddling grate" function tested
Keramott "fired white"
Instructions for the Operator/Customer
Handling of the appliance explained intelligibly
Warranty terms and conditions, and coverage explained
Wire brush □ Glove □ Operating Manual □
The end customer hereby confirms that he/she can now put the stove into operation without assistance. He/she further
confirms that the pellet stove has been handed over in a fully functional state and is free of defects.
------------------
Location, date
Austroflamm GmbH, Austroflamm Platz 1, 4631 Krenglbach, Austria, Tel. 0043/7249/46443, info@austroflamm.com
Town/City
□ Stainless steel □ Fireclay
Height of chimney:
---------------------------
Signature of Operator/Customer
Retailer/Technician
Company
Street
Postcode
Telephone
Email
Software version control unit
Software version operating panel
Software version WLAN box
WLAN module □ Yes
Number of deflectors:
Total length of the flue pipes:
Flue pipes in plug-in system
lip
Sea level:
Chimney draught – Actual value:
Diameter of the flue pipe:
Outside temperature during draught measurement:
Function of "induced draught fan" tested
Function of "worm gear motor" tested
„Schneckenmotor"geprüft
Function of "ignition cartridge" tested
Partial load test carried out
Cleaning and maintenance interval explained
Photographic documentation of the CURRENT state of the
"pellet stove installation"
(Please be sure to obtain the customer's consent
Trial heating of the appliance and switching it off jointly with
the customer.
-----------------------------------------
Signature of Technician
Town/City
□ No
□ with sealing lip □ without sealing
Target value: 3–12 Pa
beforehand!)