Technical Data - Elcon Nect next BIG 101 Serie Bedienungsanleitung

BIG 101x

4 Technical Data

SHDSL interface
SHDSL interface
EFM Bonding
SHDSL-connection
LAN interfaces
Ethernet LAN
LCT interface
Ethernet LAN
DHCP
Management
Remote Management
Firmware Update
Power supply of plug-in power supply module (Euro plug)
Operating voltage range
Frequency range
Current consumption
Power supply of BIG 101x
Nominal voltage
Current consumption
Casing
Design version
Display elements
Dimensions
Colour
Weight
Environmental conditions (according to ETS 300 019)
Storage and transport
Operation
Standards, Certificates
EMC
Safety
CE marking
Version: 2010/12/01
acc. to ITU-T G.991.2 G.SHDSL.bis, 4- SHDS Line pairs
acc. to IEEE 802.3ah
1 × RJ-45
LAN2 ... LAN4 (Ethernet Bridge)
3 × RJ45; 100 Mbps; full duplex; Auto MDI / MDIX; Transpa-
rent Bridging mode
LAN1 (access to Web-GUI)
1 × RJ45; Auto MDI / MDIX; Auto-Negotiation
IP-address assignment through integrated DHCP-server
SNMP Management (SNMPv2);
optional dynamic configuration by means of TFTP
Remote and local Firmware Update
100 V ... 240 V AC
50 Hz ... 60 Hz
≤ 0.5 A
12 V DC
< 1.2 A
Plastic casing with integrated display elements and physical
interfaces
6 LEDs for status information
240.4 mm × 160.4 mm × 48.2 mm (W × D × H)
signal white (RAL 9003)
0.5 kg
Temperature: -40°C ... +70°C
Humidity: 5% ... 95%
Temperature: 0°C ... +45°C
Humidity: 5% ... 95%
ETSI EN 300 386, EN 55022 Class B, ETSI ES 201 468,
ITU-T K.21
EN 60950-1
53