Menu „Wan - Elcon Nect next BIG 101 Serie Bedienungsanleitung

BIG 101x
3.4 Menu „WAN"
The menu item „WAN" allows you to perform the IP-configuration of your BIG 101x, to
make the device accessible from the WAN-interface (for management operations). By default
the device has been set to DHCP, i.e. automatical data download from a DHCP-server. For
static configuration, select „Static" as „WAN configuration type" and enter then the required
address information and the VLAN-ID (VID) under VLAN-MGMT. The management traffic
will then always be sent with the set VID (default: VID = 3) in WAN direction.
Figure 13: WAN configuration of the BIG 101x
44 Version: 2010/12/01