Lan-Port (Lan2 - Elcon Nect next BIG 101 Serie Bedienungsanleitung

2.7 LAN-Port (LAN2 ... LAN4)
The LAN2/3/4-ports can be configured as data interfaces. With the available device version,
only LAN2-interface has been enabled for connection of the customer devices (CPE/ Router).
This port is operated in bridge mode, whereby data traffic to the WAN-interface and vice ver-
sa is not transmitted via the network processor, but is directly passed to the WAN interface.
Below find the parameters and functions that will be supported by the LAN-ports:
• Standard Ethernet Protocol IEEE 802.3
• IEEE 802.1Q, 802.1d, native Multicast
• Maximum MTU size: 1500 bytes
• 4 × RJ45 Ethernet 10/100 Base-T, MDI/MDIX-Autosensing
(Pin assignment as illustrated in fig. 5)
36
Figure 5: LAN-interface MDIX-Pin assignment
BIG 101x
Version: 2010/12/01