Husqvarna AUTOMOWER EPOS Kurzanleitung Seite 4

L E D S TAT U S I N D I CATO R L A M PS
The robotic lawn mower, the charging station and the reference station have LED indicator lamps to show the current status.
Read the Operator's manual for more information.
LED status indicator for the robotic lawn mower
Green solid light
Green pulsating light
Green flashing light
Red solid light
Red flashing light
Yellow solid light
Yellow pulsating light
Yellow flashing light
Blue solid light
Blue pulsating light
White solid light
White pulsating
White flashing light
Magenta flashing light
LED status indicator for the reference station
Green solid light
Green pulsating light
Red flashing light
LED status indicator for the charging station
Green solid light
Green flashing light
Red flashing light
Red solid light
QG_EPOS.indd 4 QG_EPOS.indd 4
The product is mowing the lawn, or leaving the charging station. The accurate position is good.
The product is mowing the lawn, or leaving the charging station. The accurate position is bad.
The product is paused.
The product has stopped due to an error.
The product has stopped due to an error.
The STOP button has been pushed. The accurate position is good.
The STOP button has been pushed. The accurate position is bad.
The product requests the PIN code.
The product is in the charging station.
The product is charging.
The product is in installation or appDrive mode. The accurate position is good.
The product is in installation or appDrive mode. The accurate position is bad.
Startup of the product.
The basic setting for the product has not been set in the Automower® Connect app.
In operation.
Startup of the reference station.
The reference station is not working due to an error.
Good boundary loop signal.
ECO mode is activated.
Malfunction in the charging station's antenna.
Fault in the circuit board or incorrect power supply in the charging station.
E N
2020-04-03 12:27:51 2020-04-03 12:27:51