AFRISO RG 210 Betriebsanleitung Seite 54

5.3.1 Supply voltage
Verify that the product is connected to mains by means of a suitable,
permanently installed cable (for example NYM-J 3 x 1.5 mm²).
Verify that the power supply to the control unit is separately fused (16 A
maximum).
1. Route the mains cable through the upper rubber piece into the product.
2. Connect the phase to terminal L1.
3. Connect N.
4. Connect the protective conductor to terminal PE.
Mounting
RG 210
EN
22