Function Buttons; View Settings; Ptz Interface - urmet 1093 Schnellanleitung

4.4.5

FUNCTION BUTTONS

ICON
Starts/stops live LIVE connection to all available DVR channels at the same time according to the chosen
The file name will be of the following type: Picture_192.168.36.40_05_20071113_094244_6227453 where
192.168.36.40 → IP address of the device
-
- 05
- 20071113
- 094244
- 6227453
Press once (the icon will change to
4.4.6

VIEW SETTINGS

ICON
This is used to adjust the volume during playback if audio is available (1093/041 only) and if "VIDEO &
4.4.7

PTZ INTERFACE

ICON
/
DS1093-013
This allows to acquire a snapshot of the selected LIVE video channel (red box).
The acquired image may be saved by default in the C:\picture\ folder in bitmap format.
→ video channel
→ date in year/month/day format
→ time in hour/minute/seconds format
→ ID
The acquired sequence is saved by default in the folder C:\ mpeg4record
AUDIO" stream is set in system configuration menu (chapter 5.3.2.1).
This setting is used to adjust the brightness of the picture. Drag the cursor to set.
This setting is used to adjust the contrast of the picture. Drag the cursor to set.
This setting is used to adjust the hue of the picture. Drag the cursor to set.
This setting is used to adjust the colour of the picture. Drag the cursor to set.
This is used to position the connected dome camera. The central button "↻" is not used.
This is used to recall a previously stored presetting.
Enter the preset number to be recalled and click on ►.
This is used to adjust the zoom of the connected dome camera.
This is used to adjust the focus of the connected dome camera.
This is used to adjust the iris opening/closing of the connected dome camera.
DESCRIPTION
viewing mode.
) to start recording the selected LIVE video channel (red box) on the
PC. Press again to stop.
Not enabled.
Restores default settings
DESCRIPTION
Drag the cursor to set.
DESCRIPTION
Not used
Press "+" and "-" to adjust.
Press "+" and "-" to adjust.
Press "+" and "-" to adjust.
52