Copy To Camera; Recording Menu Advanced Settings; Stream Type - urmet 1093 Schnellanleitung

In this mode, recording starts as soon as a sensor detects an alarm.
In this mode, recording starts as soon as either a sensor detects an alarm or a motion is detected.
In this mode, recording starts as soon as either a sensor detects an alarm and a motion is detected.
In this mode, recording starts when the "REC" button is pressed.
Press "REC" to stop the recording again.
2.2.1.8

Copy to camera

Select "Copy to camera" to select on which cameras to copy the following settings:
•
resolution
•
bit rate
•
frame rate
•
enable rec - schedule
Select "all" to copy the settings on all cameras. Select "Copy" and press "ENTER" to copy the settings. Confirmation of the
operation will be required: press "ENTER" again to confirm.
2.2.2

RECORDING MENU ADVANCED SETTINGS

Position the "Active Frame" on the "SETUP" icon and press "ENTER".
The following window will appear:
This page contains the advanced menu settings.
Select "SETUP" and press "ENTER" to access advanced settings.
The selected item is highlighted.
Press arrows "◄►" to point the cursor to the various menu items.
Select "CONFIRM" and press "ENTER" to make the changes effective.
Select "CANCEL" and press "ENTER" to cancel the changes.
Press "ESC" to go back by one step.
Press "ESC" several times until the configuration window closes to quit the configuration menu.
2.2.2.1

Stream type

This option can be used to select whether to record only images or both images and audio.
Possible options are: "Video" and "Audio&Video".
Use "▲▼" to select the streaming type to be recorded.
IMPORTANT NOTE
For DVR DVS Ref. 1093/065, only the "Video" option is available.
For DVR DVS Ref.1093/064, 1093/066, the "Video" and "Audio&Video" options are available.
For DVR DVS Ref.1093/066 (16ch), the 4 audio channels are automatically associated to the first 4 video channels.
Audio/video synchronism is maintained if the frame rate setting is between 6fps ÷25fps.
DS1093-013
Alarm
Motion / alarm
Motion & alarm
Command
Figure 28: recording menu (advanced settings)
41