Select Camera; Resolution; Bit Rate; Frame Rate - urmet 1093 Schnellanleitung

2.2.1.2

Select camera

This option is used to select the camera on which to edit the recording and configuration settings. Use "▲▼" to select the
camera. The respective camera will appear in the "Camera name" field (assigned in the "camera" → "name" field).
2.2.1.3

Resolution

This menu option is used to set the resolution type to be reached for recording on the selected camera. In general, Urmet DVR
DVS devices are capable of supporting, according to the model, the following recording resolutions: "DCIF" "2CIF", "CIF", and
"QCIF". Use "▲▼" to select the resolution type.
Correspondence between code and respective resolution in PAL format are shown in the following table.
The following resolution options can be selected on Urmet DVR DVS ref.1093/064:
"2CIF", "CIF" and "QCIF" on all channels
The following resolution options can be selected on DVR DVS ref.1093/065:
"2CIF", "CIF" and "QCIF" on all channels
The following resolution options can be selected on DVR DVS ref.1093/065:
"2CIF", "CIF" and "QCIF" on all channels
2.2.1.4

Bit rate

This option is used to set the bit rate (fixed bit rate) or max bit rate (variable bit rate) to be used. Possible options are: "32 kbps",
"48 kbps", "64 kbps", "80 kbps", "96 kbps", "128 kbps", "160 kbps", "192 kbps", "224 kbps", "256 kbps", "320 kbps", "384
kbps", "448 kbps" "512 kbps", "640 kbps", "768 kbps", "896 kbps", "1 Mbps". Use "▲▼" to select. A numeric character input
bar will appear when the "user" option is selected.
Use the number keys 0÷9 on the front panel to enter a character.
Use the arrow buttons "◄►" to mov
Press "EDIT" to delete a character.
A numeric value from 32 to 8192 can be entered.
IMPORTANT NOTE
It is advisable to exceed 1 Mbps for all Urmet DVR
Refer to the "Frame rate" pa
2.2.1.5

Frame rate

The number of frames stored for each selected camera second can be selected using this item.
Possible options are: "1/16", "1/8", "1/4", "1/2", "1", "2", "4", "6", "8", "10", "12", "16", "20" and "25".
Use "▲▼" to select.
A high frame-rate corresponds to films played back in real time with more fluid sequences. A lower frame-rate saves time in terms
of hard disk space occ upation, to the detriment of recording quality (less fluid sequences). Selecting a lower frame-rate will save
hard disk space.
IMPORTANT NOTE
The maximum frame rate value depends on the set resolution.
RESOLUTION
2CIF
CIF
QCIF
2.2.1.6

Enable rec

This option is used to enable or disenable selected camera recording. To enable, select the respective check box using "◄►"
and press "ENTER" or "EDIT".
Symbol " " indicates that the recording option is enabled; symbol "×" indicates that it is not.
DS1093-013
CODE
2CIF
CIF
QCIF
Table 2: correspondence between code and PAL resolution
Ref.1093/064 (4 channel video/audio looping H.264 2CIF/CIF)
Ref.1093/065 (8 channel H.264 2CIF/CIF)
Ref.1093/066 (16 channel video/audio looping H.264 2CIF/CIF)
e the cursor.
DVS devices.
ragraph for settings.
REF. 1093/064
Max frame rate
Pe r chann el
16 fps
25 fps
25 fps
RESOLUTION - PAL
704x288
352x288
176x144
Max.
Max frame rate
Recom mend ed bit
rate
1 Mbps
1 Mbps
256 kbps
39
REF. 1093/065-066
Recom
Per chann el
6 fps 512 kbps
12 fps 512 kbps
25 fps 256 kbps
Max.
mended b it
rate