Unpacking And Connecting; Using The Massage Mat In A Car; Using The Massage Mat At Home; Operation - ULTIMATE SPEED UAMM 12 A1 Bedienungsanleitung

CPe102621 Automassage LB7 Seite 7 Mittwoch, 30. Juli 2014 5:25 17
Downloaded from www.Manualslib.com

5.1 Using the massage mat in a car

1. Place the massage mat 1 on the car seat.
2. Fasten the massage mat 1 carefully with
the securing straps 2.
3. Plug the car lead 12 into the cigarette
lighter or another
connection.
4. Plug the power plug 11 on the car
lead 12 into the power socket 10.
The remote control has
illumination. If this does not come on, the
background illumination will be switched on
first when button 5, 6 or 7 is pressed for the
first time. Only when the background
illumination is on does the button have the
function described below. The background
illumination goes off again after about 5
seconds.
If you press the OFF button 4, the appliance
switches off immediately.

6.1 Switching the appliance on and off

1. To switch the appliance on, press the
ON button 6.
The LCD display 3 shows "MODE 0".
As soon as the appliance is switched on,
the timer will automatically start running
at 30 minutes. The remaining time is
shown in the LCD display 3.
To protect the appliance from being
accidentally left on, it automatically
switches off again after 30 minutes.
UAMM 12 A1
manuals search engine

5. Unpacking and connecting

5.2 Using the massage mat at home

1. Place the massage mat 1 on a suitable
chair or armchair.
2. Fasten the massage mat 1 carefully with
the securing straps 2.
suitable 12 V 3. Plug the mains adapter 13 into a mains
socket that complies with the technical data.
4. Plug the power plug 11 on the mains
adapter 13 into the power socket 10.

6. Operation

background 2. To switch the appliance off before the
30 minutes has expired, press the OFF
button 4.

6.2 Selecting a programme

There are 8 programmes (MODE 1 – 8)
available altogether. The programmes vary
in their intensity, the area massaged and the
massage rhythm.
1. Press the MODE programme button 5.
The illumination of the remote control will
be activated.
2. Press the MODE programme button 5
again.
The appliance switches to the next
programme and the motors start to work.
The selected programme number is
shown in the LCD display 3.

6.3 Switching the heater on and off

1. Press the heat button 7.
The illumination of the remote control will
be activated.
7