Items Supplied; Unpacking And Connecting; Using The Massage Mat In A Car; Using The Massage Mat At Home - ULTIMATE SPEED UAMM 12 B2 Bedienungsanleitung

- never place drinks or other liquids on
the appliance;
- always keep the mains adapter or car
lead away from moisture.
If liquid should enter the appliance, un-
plug the power plug immediately and
have the appliance repaired by a quali-
fied technician.
Never pick up the mains adapter when
your hands are wet.
If you are not using the appliance for a
prolonged period of time, unplug the
mains adapter or car lead. This is the
only way to ensure the complete ab-
sence of electric power and to protect
against the appliance being switched
on accidentally.
DANGER in road traffic
In the case of side airbags, the middle
and upper fastening strap must not be
used.
If you have any questions about the air-
bag, please consult your car manual or
ask at your car workshop.
Never use the appliance in the car
while it is in motion. It may cause a dis-
traction and endanger traffic safety. If
you wish to change the settings, stop
the vehicle.

4. Items supplied

1 car massage mat 6
1 mains adapter 14
1 car lead 13
1 set of user instructions
5. Unpacking and con-
necting
Unpacking
1. Remove all parts from the packaging.
2. Check that all parts are present and in-
tact.
6
GB
5.1 Using the massage mat
in a car
1. Place the massage mat 6 on the car
seat.
2. Figure A/B: Fasten the massage
mat 6 carefully with the securing
straps 8.
3. Plug the car lead 13 into the cigarette
lighter or another suitable 12 V con-
nection.
4. Plug the power plug 12 on the car
lead 13 into the power socket 11.
5.2 Using the massage mat
at home
1. Place the massage mat 6 on a suitable
chair or armchair.
2. Fasten the massage mat 6 carefully
with the securing straps 8.
3. Plug the mains adapter 14 into a
mains socket that complies with the
technical data.
4. Plug the power plug 12 on the mains
adapter 14 into the power socket 11.

6. Operation

6.1 Switching the device on
and off
1. Switch the device on by pressing the
POWER 1 button.
The LED next to POWER is lit red con-
tinuously during operation.
- The device always starts in the pro-
gram AUTOMATIC at the setting
LOW. The corresponding LEDs are lit.
- As soon as the device is switched on,
an internal timer starts.
To protect the device against acciden-
tal continuous operation, it switches
off automatically after 30 minutes.