ENGLISH (Original instructions)
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
3-1. Lamp
4-1. Reversing switch lever
5-1. Speed change lever
6-1. Action mode change lever
7-1. Adjusting ring
7-2. Graduations
7-3. Arrow
SPECIFICATIONS
Capacities
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
For Model BDF441
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Vibration
The
vibration
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Downloaded from
www.Manualslib.com
Explanation of general view
8-1. Steel band
8-2. Grip base
8-3. Side grip
8-4. Protrusion
8-5. Groove
9-1. Sleeve
10-1. Bit holder
10-2. Bit
11-1. Screw
11-2. Hook
11-3. Groove
Model
Steel
Wood
Wood screw
Machine screw
High (3)
-1
)
Medium (2)
Low (1)
Overall length
Net weight
Rated voltage
) : 70 dB(A) or less
pA
Wear ear protection
total
value
(tri-axial
vector
2
) : 2.5 m/s
or less
h,D
2
manuals search engine
BDF441
13 mm
50 mm
6 mm x 75 mm
2.3 kg
D.C. 14.4 V
ENE034-1
For Model BDF451
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
ENG103-4
The noise level under working may exceed 80 dB (A).
Vibration
The
vibration
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
ENG202-3
Uncertainty (K) : 1.5 m/s
sum)
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
4
13-1. Limit mark
14-1. Rear cover
14-2. Screws
15-1. Arm
15-2. Spring
15-3. Recessed part
16-1. Carbon brush cap
17-1. Hole
17-2. Carbon brush cap
BDF451
13 mm
65 mm
10 mm x 89 mm
6 mm
0 - 1,700
0 - 600
0 - 300
238 mm
2.4 kg
D.C. 18 V
) : 72 dB(A)
pA
Wear ear protection.
total
value
(tri-axial
vector
2
) : 2.5 m/s
or less
h,D
2
ENG104-2
ENG202-3
sum)
ENG901-1