Transport; Positioning/Work Station - Femi 785XL Gebrauchs- Und Wartungsanleitung

EN
NOTE - Machine weight:
For information on the weight of the machine described in this manual, please refer to the
relative document with all the technical details provided as an appendix to this manual.
DANGER - WARNING
- MACHINES WEIGHING MORE THAN 20 KG MUST BE HANDLED BY 2
PEOPLE.
- TO MOVE THE MACHINE LOWER THE SAW BODY TO THE END OF STROKE
AND SECURE IT IN THIS POSITION BY TYING IT TO THE CLAMP SCREW
USING ROPES OR TIES.
2.4.

TRANSPORT

DANGER - WARNING
TO ENSURE SAFE TRANSPORT OF THE MACHINE FROM ONE WORK PLACE
TO ANOTHER, REPLACE IT IN ITS ORIGINAL PACKAGING.
2.6

POSITIONING/WORK STATION

a) Position the machine on a work bench or on a pedestal at a height of between 900 – 950
mm from the ground. The surface on which the machine is placed must be big enough to
guarantee machine stability at all times (Fig. 3).
DANGER - CAUTION
Machine positioning in the work area must be performed ensuring a clearance of
at least 800 mm on all sides of the machine (see Fig. 3).
b) Position the machine in a work area with adequate lighting.
c) It is advisable to secure the machine to the workbench with M6 screws using the holes
provided on the base.
2.7. POSITIONING/WORK STATION
d) Position the machine on a work bench or on a pedestal at a height of between 900 – 950
mm from the ground. The surface on which the machine is placed must be big enough to
guarantee machine stability (Fig. 3).
DANGER-WARNING AUTONOMOUS CUTTING SAWS
This model of machine must only be used in a dedicated environment/area to which unauthorized
access is prohibited.
If no such work area is available, it is advisable to cordon off the machine's operating area (2
metres of clearance on all sides of the bandsaw) using red and white barrier chain and yellow
lines on the fl oor.
Put up a "No access to unauthorized persons" sign.
e) Position the machine in a work area with adequate lighting.
f) It is advisable to secure the machine to the workbench with M6 screws using the holes
provided on the base.
28
Downloaded from www.Manualslib.com manuals search engine
Art. 785XL, SN205XL, 787XL, NG160
Art. ABS NG160
Art. ABS NG160