Technical Features; General Safety Regulations - Femi 785XL Gebrauchs- Und Wartungsanleitung

EN
DANGER - WARNING
THE TABLE SAW HAS BEEN DESIGNED AND BUILT FOR DRY CUTTING
DO NOT USE ANY KIND OF CUTTING FLUID.
DANGER - WARNING
THE SAW WITH WHEELS HAS BEEN DESIGNED AND BUILT FOR BOTH DRY
CUTTING AND FOR USE WITH CUTTING FLUID.
PERSONNEL AUTHORIZED TO USE THE MACHINE
This machine has been designed and manufactured to be used by qualifi ed personnel with
adequate training, experience and skills in accordance with the characterisitics described
below:
Operators / Apprentices:
• may be male or female
• must be aged 14 or over
• must have full use of both hands
• must have no physical or mental disabilities
• must know and fully understand the contents of the user manual.
PERMITTED AMBIENT CONDITIONS
Ambient condition operating limits:
• operating ambient with a temperature between + 5°C – + 40°C
relative humidity 50 % at a temperature of + 40 °C
maximum operating altitude: 1,000 m.a.s.l ;
• the machine must be used in an environment which is protected from the elements.
DANGER - CAUTION
The machine does not have any signifi cant environmental impact, however it must
still be evaluated by the user in order to minimize any possible negative effects.
DANGER - WARNING
THIS MACHINE IS NOT SUITABLE FOR USE IN POTENTIALLY EXPLOSIVE
ATMOSPHERES.
1.4.

TECHNICAL FEATURES

NOTES
For information on the machine's technical features, please refer to the relative document
provided as an appendix to this manual.
1.5.

GENERAL SAFETY REGULATIONS

DANGER - WARNING
WHEN USING ELECTRICAL TOOLS IT IS ESSENTIAL TO OBSERVE BASIC
SAFETY PRECAUTIONS AT ALL TIMES TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK AND INJURY.
READ ALL THESE INSTRUCTIONS CAREFULLY BEFORE PROCEEDING TO
USE THIS PRODUCT AND KEEP THEM IN A SAFE PLACE.
22
Downloaded from www.Manualslib.com
Art. 785XL, SN205XL, NG160, ABS NG160
Art. 787XL - 1750XL
manuals search engine
Cont....