For The Installer; General; Installation Site; Refrigerant - Daikin EKHH2E200AAV3 Installations- Und Gebrauchsanleitung

1.3

For the installer

1.3.1 General

If you are not sure how to install or operate the unit,
contact your dealer.
NOTICE
Improper installation or attachment of
equipment or accessories could result in
electric shock, short-circuit, leaks, fire or other
damage to the equipment. Only use
accessories, optional equipment and spare
parts made or approved by
WARNING
Make sure installation, testing and applied materials
comply with applicable legislation (on top of the
instructions described in the Daikin documentation).
CAUTION
Wear adequate personal protective equipment
(protective gloves, safety glasses,...) when
installing, maintaining or servicing the system.
DANGER: RISK OF BURNING
Do NOT touch the refrigerant piping,
water piping or internal parts during and
immediately after operation. It could be
too hot or too cold. Give it time to return
to normal temperature. If you must touch
it, wear protective gloves.
Do NOT touch any accidental leaking

refrigerant.

WARNING
Provide adequate measures to prevent that the unit
can be used as a shelter by small animals. Small
animals that make contact with electrical parts can
cause malfunctions, smoke or fire.
CAUTION
Do NOT touch the air inlet or aluminium fins
of the unit.
NOTICE
Do NOT place any objects or equipment
on top of the unit.
Do NOT sit, climb or stand on the unit.
NOTICE
Works executed on the outdoor unit are best
done under dry weather conditions to avoid
water ingress.
Page 4
In accordance with the applicable legislation, it might be
necessary to provide a logbook with the product
containing at least: information on maintenance, repair
work, results of tests, stand-by periods,...
Also, at least, following information must be provided at
an accessible place at the product:
Instructions for shutting down the system in case
of an emergency
Name and address of fire department, police and
hospital
Name, address and day and night telephone
Daikin.
numbers for obtaining service
In Europe, EN378 provides the necessary guidance for
this logbook.

1.3.2 Installation site

Provide sufficient space around the unit for
servicing and air circulation.
Make sure the installation site withstands the unit's
weight and vibration.
Make sure the area is well ventilated. Do NOT
block any ventilation openings.
Make sure the unit is level.
Do NOT install the unit in the following places:
In potentially explosive atmospheres.
In places where there is machinery that emits
electromagnetic waves. Electromagnetic waves
may disturb the control system, and cause
malfunction of the equipment.
In places where there is a risk of fire due to the
leakage of flammable gases (example: thinner or
gasoline), carbon fibre, ignitable dust.
In places where corrosive gas (example:
sulphurous acid gas) is produced. Corrosion of
copper pipes or soldered parts may cause the
refrigerant to leak.
1.3.3 Refrigerant
If applicable. See the installation manual of your
application for more information.
WARNING
During tests, NEVER pressurize the product
with a pressure higher than the maximum
allowable pressure (as indicated on the
nameplate of the unit).
WARNING
Take sufficient precautions in case of
refrigerant leakage. If refrigerant gas leaks,
ventilate the area immediately. Possible risks:
Excessive refrigerant concentrations in a
closed room can lead to oxygen deficiency.
Installation and user manual