Operating SaneoSPORT
Finishing the training, cleaning
The device switches off automatically after the treatment time has
GB
expired. The treatment can be stopped at any time by pressing
the On/Off button.
➔ Remove the body surface electrodes only when the device is
switched off.
➔ After using the device, gently clean the electrodes and the mus-
cle training system with a slightly damp, lint-free cloth. You can
increase the longevity of the electrodes by cleaning them.
➔ Attach the electrodes back to the foil, and store the foil in the
protective packaging.
Changing batteries
➔ Please switch off the device before changing the battery.
1 Open the battery compartment.
2 Insert the battery in the correct orientation in the battery
compartment.
3 Close the battery compartment.
26
If the adhesive force of the electrodes wears off, simply
moisten the adhesive surface with a little water and
store the electrodes in a cool place until their next use
(e.g. in the refrigerator). If this procedure fails to restore
the adhesive force, the electrodes must be replaced.