Operating SaneoSPORT
Enter parameters
You can input the settings of muscle training program u1 or u2.
Your program configuration will then be called like a preset program.
➔ Press and hold the Menu/Confirmation button.
After about three seconds, the display will show the Program
selection menu with the current program.
➔ Press the ▲ or ▼ button repeatedly until you find the muscle
training program that you wish to configure.
➔ Press the Menu/Confirmation button to navigate to the first
parameter that can be defined by the user.
➔ The parameter value to be set flashes and can be decreased by
pressing the ▼ or ▲ button.
➔ Press the Menu/Confirmation button to confirm the selected
value. The next parameter is displayed.
➔ Proceed to the last parameter Treatment time as described
above.
➔ After you have also confirmed the treatment time using the
Menu/Confirmation button, you will exit from the Program
selection menu.
➔ The display shows the Treatment menu for the configured pro-
gram. The treatment with the previously set parameter values
can begin.
Start training
To start training set the stimulation intensity as de-
scribed in Select the stimulation intensity on page 21.
GB
25