Switch On/Off Saneosport; Set The Program - tic Medizintechnik SaneoSPORT Bedienungsanleitung

Operating SaneoSPORT

Switch on/off SaneoSPORT

The SaneoSPORT is switched on and off with the On/Off
GB
button. After the device is switched on, the software version
is shown briefly on the display.
Press the On/Off button for approx. 3 seconds to switch it off.

Set the program

Directions for setting the desired program (see 'Program overview',
page 11):
➔ Switch the SaneoSPORT on with the On/Off button.
The treatment menu for the preset program will be
displayed shortly afterwards.
➔ Press and hold the Menu/Confirmation button for about
3 seconds. The display now shows the program selection
menu with the current program.
➔ Press the ▲ or ▼ button repeatedly until you find the
desired program.
➔ Briefly press the Menu/Confirmation button.
You exit the program selection menu. The selected pro-
gram is immediately displayed in the treatment menu.
➔ Then select the individual stimulation intensity using the
▲/▼ buttons.
22
Please note that the program can only be changed if the
device is not supplying any current at the moment.
In order to change a program while another program is
running, the stimulation intensity must first be reduced to
'0' with the ▼ button.