Single-Cell And Multi-Cell Systems - Introduction; Single-Cell System With Comfortel Ws-500S; Multi-Cell System With Comfortel Ws-500M - Auerswald COMfortel WS-500S Betriebsanleitung

Single-Cell and Multi-Cell Systems – Introduction
Single-Cell and Multi-Cell Systems – Introduction

Single-Cell System with COMfortel WS-500S

You can use a COMfortel WS-500S to create a single-cell system with a base
station.
Note: The COMfortel WS-500S is not suitable for setting up or extending
a multi-cell system. However, you can convert a COMfortel WS-500S to a
COMfortel WS-500M, using activation.
COMfortel WS-500S as DECT Base Station
• provides the DECT functions for the cell
• processes the media from the mobile device directly to the PBX
• provides connection channels for the mobile devices
• has an integrated DECT Manager that provides an application gateway
between SIP and DECT signalling and performs DECT registration for
mobile devices.
Mobile devices
Up to 20 mobile devices can be connected.
PBX
• creates the connection to the public telephone network
• provides a central administration point for telephone connections and
telephone books

Multi-Cell System with COMfortel WS-500M

One or more COMfortel WS-500Ms can be used to create a multi-cell system
with e or more base stations and one central management station. In this case,
the COMfortel WS-500M performs difference device roles.
The figures below show the possible extension levels:
26
COMfortel WS-500S/500M - Instructions V02 08/2019