6.3 Universal control inputs
As a further possibility for influence the
charger there are two digital inputs at the
control plug. These functions can be de-
fined by software. (See the software de-
scription)
One possibility, for example, would be the
use of an external battery management
system to monitor the charging procedure.
The inputs pin 7 and pin 8 from the control
plug can be controlled with a nominal
logical signal from 5 to 15 V against pin
18 (ground). (max. -13V...+40V)
6.4 Status indicator
The charger is also equipped with an out-
put which provides information on its im-
mediate operating status. If the signal at
this connection indicates a logical "1", the
battery will not be charged despite the unit
being connected to the mains supply - the
charger switches to the "Battery charge
not possible" status.
NLG4
6.3 Universelle Eingänge
Als weitere Möglichkeit zur Beeinflussung
des
Ladegerätes
Bedienungsstecker zwei digitale Eingänge
zur Verfügung. Deren Funktion kann
softwaremässig definiert werden. (Siehe
Beschreibung der Software)
Denkbar
wäre
zum
Überwachung der Ladung mittels externem
Batteriemanagementsystem.
Die Eingänge an Pin 7 und 8 des
Bedienungssteckers können mit nominal 5
- 15 V (max. -13V - +40V) Logiksignalen
bezüglich Pin 18 (Ground) angesteuert
werden.
6.4 Statusanzeige
Zusätzlich steht auch ein Ausgang für die
Information
über
Betriebszustand zur Verfügung. Tritt an
diesem Ausgang eine logische 1 auf, wird
die
Batterie
trotz
Netzspannung nicht geladen, das Gerät
wechselt in den Zustand „Batterieladung
nicht möglich".
stehen
am
Beispiel
eine
den
momentanen
anliegender
14