Programming Mode; Activating Programming Mode; Setting Parameters In Programming Mode - TIPTEL 28 plus Bedienungsanleitung

3

Programming mode

3 Programming mode
Programming mode on the tiptel easyBASE 28 plus can only be
activated within the first 10 minutes after plugging in the power supply
unit. This prevents the parameters being changed accidentally during
operation.
Programming mode allows you to set various parameters to modify
the tiptel easyBASE 28 plus to suit the functionality of your telephone
connections. Additional parameters allow the tiptel easyBASE 28 plus
to be set according to your personal preferences.
3.1

Activating programming mode

To activate the programming mode, select
handset. Then enter the PIN for your tiptel easyBASE 28 plus. The PIN
only needs to be entered if a new PIN has been set up beforehand in
programming mode.
You will now hear a special dialling tone indicating that programming
mode is active.
3.2

Setting parameters in programming mode

Programming mode needs to be activated before the following para-
meters can be set. The programming process is concluded by entering
#
and confirmed by the positive acknowledgement tone. The change
will be effective immediately. You will then hear the special dialling tone
once more, which means that you can continue programming other
functions.
If an invalid value is entered during programming, a negative acknow-
ledgement tone is sounded, the procedure is cancelled and you will hear
the special dialling tone once more.
If during programming no input is made for one minute, the procedure is
cancelled and you will hear the special dialling tone again.
Programming mode can be exited at any time by replacing the handset;
the tiptel easyBASE 28 plus will then be returned to normal mode.
#9
9
on a registered
UK