Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
Programming mode
Function
3.2.11
Changing the PIN
Access to programming mode can be protected using the four-digit
PIN. The PIN only needs to be entered if a new PIN has been set
beforehand in programming mode. To change the PIN, activate
programming mode, enter the new PIN twice and confirm this by
pressing #. The change is confirmed by the positive acknowledge-
ment tone. Programming mode can then only be accessed again
by entering the new PIN once more. To restore the factory setting,
change the PIN to 0000.
If you forget the PIN, the tiptel easyBASE 28 plus can only be reset
by the Customer Service department.
Factory setting: 0 0 0 0
3.2.12
MOH
An external caller on hold hears no call on hold tone.
MOH
An external caller on hold hears call on hold tone.
Factory setting: 1
Parameter code
Changing the PIN
26
Music on hold
27
27
15
Inputs
new PIN
new PIN #
UK
0 #
1 #
Werbung
Kapitel
Inhaltsverzeichnis
