Settings Menu Contents - Finlux Lugano50FL/UHD Bedienungsanleitung

V Position (in PC
mode)
Dot Clock (in PC
mode)
Phase (in PC mode)
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added
to the Picture Settings while in PC mode.
Sound Menu Contents
Volume
Equalizer
Balance
Headphone
Sound Mode
AVL (Automatic
Volume Limiting)
Headphone/Lineout
Dynamic Bass
Digital Out
Bass Gain

Settings Menu Contents

Conditional Access
Language
Parental
Timers
Recording Configuration Displays the recording configuration menu (Usb connection required).
Date/Time
Sources
Satellite Settings
Network Settings
Other Settings: Displays other setting options of the TV set
Menu Timeout
Downloaded from www.Manualslib.com
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock adjustments correct the interference that appear as vertical banding in
dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Depending on the resolution and scan frequency that you input to the TV set, you
may see a hazy or noisy picture on the screen. In such a case you can use this item
to get a clear picture by trial and error method.
Adjusts the volume level.
Selects the equalizer mode. Custom settings can be made only when
in user mode.
This setting is used for emphasizing left or right speaker balance.
Sets headphone volume.
You can select a sound mode (if the selected channel supports).
This function sets the sound to obtain fixed output level between programmes.
When you connect an external amplifier to your TV using the headphone jack,
you can select this option as Lineout. If you have connected headphones to the
TV, set this option as Headphone.
Enables or disables the Dynamic Bass.
Sets digital out audio type.
Controls the bass gain level. Use Left or Right button to set.
Controls conditional access modules when available.
Configures language settings (may change depending on the country selected)
P re fe rr e d a n d cu r re n t se tti n g s will be available. Current settings can be
changed only if the broadcaster supports.
Enter correct password to change parental settings. You can easily adjust
menu lock, maturity lock(depending on the country selected) and child lock
in this menu. You can also set a new PIN number.
Note: Default PIN can be set to 0000 or 1234. If you have defined the PIN(is requested depending
on the country selection) during the First Time Installation use the PIN that you have defined.
Sets sleep timer to turn off the TV after a certain time. Sets timers for selected
programmes (USB Record).
Sets date and time.
Enables or disables selected source options.
Displays satellite settings.
Displays network settings.
Changes timeout duration for menu screens.
manuals search engine
English - 45 -