Media Browser Menu - Finlux Lugano50FL/UHD Bedienungsanleitung

Instant Recording
Press (RECORD) button to start recording an
event instantly while watching a programme. You can
press (RECORD) button on the remote control
again to record the next event on the EPG. In this
case, an OSD will be displayed, indicating the
programmed events for recording. Press
button to cancel instant recording.
You cannot switch broadcasts or view the Media
Browser during the recording mode. While recording
a programme or during the timeshifting, a warning
message appears on the screen if your USB device
speed is not sufficent.
Watching Recorded Programmes
Select the Recordings Library from the Media
Browser menu. Select a recorded item from the list (if
previously recorded). Press the OK button to view the
Play Options. Select an option then press OK button.
Note: Viewing main menu and menu items will not be available
during the playback.
Press the (STOP) button to stop a playback and
return to the Recordings Library.
Slow Forward
If you press the
recorded programmes, the slow forward feature will be
available. You can use
Pressing button consecutively will change slow
forwarding speed.
Recording Configuration
Select the Recording Configuration item in the
Settings menu to configure the recording settings.
Format Disk: You can use the Format Disk feature
for formatting the connected USB disk. Your pin is
required to use the Format Disk feature.
Default PIN can be set to 0000 or 1234. If you
Note:
have defined the PIN(is requested depending on the
country selection) during the First Time Installation
or changed the default PIN later from the Set PIN
option under the Parental Settings menu, use the
PIN that you have defined.
IMPORTANT: Formatting your USB drive will erase
ALL the data on it and it's file system will be converted
to FAT32. In most cases operation errors will be fixed
after a format but you will lose ALL your data.
If "USB disk writing speed too slow to record" message
is displayed on the screen while starting a recording,
try restarting the recording. If you still get the same
error, it is possible that your USB disk does not meet
the speed requirements. Try connecting another
USB disk.
Downloaded from www.Manualslib.com
(PAUSE) button while watching
button to slow forward.
manuals search engine

Media Browser Menu

You can play photo, music, and movie files stored
on a USB disk by connecting it to your TV. Connect
a USB disk to one of the USB inputs located on the
side of the TV. Pressing the MENU button while in the
Media Browser mode will access the Picture, Sound
(STOP) and Settings menu options. Pressing the MENU button
again will exit from this screen. You can set your Media
Browser preferences by using the Settings Menu.
Loop/Shuffle Mode Operation
Start playback with
activate
Start playback with OK and
activate
Start playback with OK/
and activate
Custom Boot Up Logo
You can personalize your TV and see your favorite
image or photo on screen each time your TV boots
up. To do this, place your favorite image files in a USB
stick and open them from the media browser menu.
When you have chosen the desired image, highlight
it and click OK to view it in full screen. Click OK again
to choose the image as custom logo. If the image is
suitable* you will see it on the screen during the TV's
next boot up.
Note: If you perform an FTI (first time installation) the
TV will return to using the default logo.
*Images must have an aspect ratio between 4:3 to
16:9 and they must be in .jpeg, .jpg or .jpe file formats.
English - 42 -
and
TV plays next file and loop
the list.
The same file will be
played in a loop (repeat).
The file will be played in a
shuffle.