hanseatic HKGK16155DI Gebrauchsanleitung Seite 58

Page EN-26 Start-up
(26)
(25)
(4)
2. Tip the appliance back as far as possible
(45° max.) in such a way that the front
feet of the appliance (4) and the lower
hinge plate (20) are easy to reach.
3. Unscrew both of the feet of the appli-
ance (4) (anti-clockwise).
4. Use a size 8 spanner to unscrew the
three screws (25) on the hinge plate (20)
and the two screws on the (25) support-
ing plate (26).
5. Remove the hinge plate (20) and the
supporting plate (26).
6. Unscrew the decorative cap (21) from
the hinge bolt (24).
7. Loosen the nut (22) and remove it and
the snap ring (23).
8. Move the hinge bolt (24) as shown
above and reinsert or rescrew the snap
ring (23) and the decorative cap (21) re-
spectively.
(20)
(4)
(25)
(20)
(24)
(23)
(22)
(21)
(20)
(4)
9. Screw the hinge plate (20) and the sup-
port plate back onto (26) the opposite
side.
10. Screw both appliance feet (4) back on.
11. Reposition the appliance upright.
Preparing the doors
(28)
(27)
1. Remove the 3 blind plugs (27) and the
decorative cap (28) on the left side in the
area of the middle hinge and affix them
in the corresponding positions on the
opposite side.
2. Unscrew the hinge bushings (29) from
the top of the fridge compartment door
and on the bottom of the freezer com-
(4)
(29)