Herunterladen Inhalt Inhalt Diese Seite drucken

Product Description - Concept TM 4730 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28
• Some parts may keep moving for a while after the motor has been switched off and the power cord has been
disconnected from the socket. Wait until the movement stops completely.
• Use the unit solely for food processing.
• The maximum allowed temperature of the processed ingredients is 80 °C. Do not use the beater for very hot food!
• Do not attempt to repair the unit by yourself. Contact an authorised service centre for repair.
Failure to follow the manufacturer's instructions may invalidate the warranty.

PRODUCT DESCRIPTION

Unit body
A – Speed control
A – Speed control
(only 4620 series)
B – Switch
B – Switch
C – Turbo
C – Turbo
D – Unit body
D – Unit body
E – Stick extension
E – Extension release
F – Buttons for releas
buttons
of extensions
F – Stick extension
OPERATING INSTRUCTIONS
NOTICE
Before mounting or removing accessories onto or from the machine, always pull the plug out of the electrical
socket!
Prior to using a new unit, wipe the surface with a wet cloth and wash the removable accessories in warm water for
hygienic reasons.
The unit is designed for short operation periods. Do not use it for periods of longer than 1 minute at a time. Allow the
unit to cool down for at least 10 minutes after use.
Never let the appliance run idle for more than 10 seconds.
MIXING
The stick extension is designed for making sauces, toppings, soups, mayonnaise,
baby food, mixed drinks and milkshakes.
1. Put the food in the mixing bowl or another tall kitchen vessel.
2. Mount the unit body onto the shaft of the extension stick.
3. Uncoil the whole length of the power cord. Make sure the cord does not touch
any nearby sources of heat. Insert the plug into the electric voltage socket.
4. Hold the body with one hand and the mixing bowl with the other.
5. Select the desired speed, insert the unit into the mixing bowl and push the
5. Select the desired speed (the 4620 series), insert the unit into the mixing bowl
power switch to initiate operation. While mixing, use circular movements
and push the power switch to initiate operation. While mixing, use circular
22
22
A
N
A
B
C
B
D
C
D
E
F
F
E
Accessories (only 4620 series)
G – Cover with transmission
H – Chopping knife
I – Chopping bowl
J – Transmission
K – Whisker
L Mixing bowl
L – Mixing bowl
G
L
G
I
H
I
Fig. 1
EN
EN
K
K
E
L
J
D
F
H
J
TM4610, 4620
TM 4730

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis