Warranty Certificate; Product Data - Concept TM 4730 Bedienungsanleitung

WARRANTY CERTIFICATE

EN

PRODUCT DATA

Model:
Production number:
Date of purchase:
The vendor is obliged to inform the consumer of the features and parameters of the product and fill in the Warranty
Certificate fully and legibly on the day of purchase.
The Certificate is not valid without all the prescribed data correctly filled in!
The manufacturer (or importer) is responsible for the features of the product under the applicable technical standards
and conditions for the warranty period.
The warranty period is 24 months from the date of purchase, unless stated otherwise by the manufacturer (or importer).
Under the warranty the consumer is entitled to the free, timely and duly executed remedy of faults (see below), or to
receive a replacement of the defective part of the product, provided it is not disproportionate with regards to the nature
of the fault. The right to replacement of the product or termination of the purchase contract can be exercised only if all
the legal preconditions have been met, on the condition that the product was not excessively worn or damaged.
The validity of the guarantee is subject to:
- Observance of the instructions mentioned in the Operating Manual;
- A document proving payment including all the prerequisites, or a valid Warranty Certificate;
Any claims with regards to product liability shall be exercised by the consumer with the vendor where the product was
purchased.
The right to repair can be exercised at the location where you purchased the product or at an authorized service centre;
a list of the centres is included in the product package or you may find it on the website www.my-concept.com.
TM 4730
Seal and signature of vendor:
47