GERATHERM active control + GT-1115 Gebrauchsanweisung Seite 41

How to operate the unit
Notes
If you switch on the blood pressure monitor and the LCD display flashes "
battery charge is low. Please recharge it.
You can, however, still carry out the measurement.
If the LCD display "
battery charge is too low. The blood pressure monitor will switch off automatically and you must
recharge it immediately.
During recharging, the LCD display flashes and shows the following symbols:
If it is not charged at all, the
following symbols appear on the
LCD display during charging:
If charge level 2 has been
reached, the following symbol ap-
pears on the LCD display during
charging:
" appears, this means that the
If charge level 1 has been
reached, the following symbols
appear on the LCD display during
charging:
If charge level 3 has been
reached, the following symbol ap-
pears on the LCD display during
charging:
41
". This means that the
EN