Installing Wings - PARKZONE Stinson Reliant SR-10 BNF Bedienungsanleitung

Installing Wings

bottom of the wing into the top of the fuselage.
2. Attach the two (2) aileron connectors to the aileron
on the cockpit windshield.
4. Attach the wing to the fuselage using two (2) screws.
use of body clips is recommended. Although the L-pins provide
a more finished appearance, they require tape for installation
and are not as easily removed as the body clips.
Downloaded from www.Manualslib.com manuals search engine
5. Install left and right struts in fairings in the lower fuselage
using two (2) RC body clips or two (2) L-pins.
for storage. Finish on L-pins or body clips may not match
photos.
strut in the fairing under the wing.
8. Attach the wing struts to the fairings under the wing using
two (2) RC body clips or two (2) L-pins.
9. Where used, apply tape to the four (4) L-pins to hold them
on the struts.
EN
9