Installing The Propeller - PARKZONE Stinson Reliant SR-10 BNF Bedienungsanleitung

Installing the Propeller

Factory Setting for Control Surface Travel
100% on high rate and at 70% on low rate. These dual rates
for 100% adjustable travel volume (ATV).
The factory settings provide a moderate amount of control
surface movement. Clevises are installed in the outermost holes
of the control horns (away from the control surface).
the Stinson Reliant. Propeller damage can result from aircraft
crashes.
Downloaded from www.Manualslib.com manuals search engine
could result.
1. Put collet on the motor shaft.
2. Put the propeller backplate on the collet shaft.
3. Install cowl
EN
15