Installing Flight Battery - PARKZONE Stinson Reliant SR-10 BNF Bedienungsanleitung

Installing Flight Battery and
Adjusting Center of Gravity
Installing the Flight Battery
centered control surfaces, please re-bind the aircraft so the
control surfaces are neutral when plugging in the flight
battery.
the flight battery.
1. Turn the latch and open the battery door in the bottom of
the aircraft.
2. Install two hook strips on the battery.
3. Install the battery on the loop strip and under the hook and
loop straps in the battery tray.
Downloaded from www.Manualslib.com manuals search engine
5. Move the battery in the fuselage, either forward or to the rear,
to adjust the aircraft center of gravity for flight.
Rear placement
7. Make sure wires in the fuselage do not block the battery door
when latching the door.
the Battery
with the ParkZone 1800mAh 11.1V Li-Po battery installed in the
middle of the battery cavity.
is desired, move the battery forward or to the rear.
Forward placement
11
EN