Technical Specifications; Cleaning And Maintenance - cecotec TOTALPURE 3IN1 CONNECTED MAX Bedienungsanleitung

ENGLISH
Once the set temperature has been reached, the Heat mode will turn off and the device will
switch to a cool breeze.
If the room temperature falls below the set temperature, the Heat mode will be automatically
activated again.
The maximum operating time of the Heat mode is 9 hours. After this time, the device will
automatically turn off. To restart it, press the power button or use the remote control.
Note:
The default operating temperature is 25 ºC.
The device panel does not display temperature values below 0 ºC. If the room temperature is
lower than 0 ºC, the display will show 01.
Safety system
This product features an overheat protection sensor and a tip-over safety feature that cuts
power to the unit if it is accidentally tipped over or in case of overheating. If this sensor
is triggered, unplug the machine and allow the fan to cool down. Check and remove any
obstructions before restarting the device and be sure to place it on a hard, stable surface.
4. CONNECTIVITY
Connect your phone to the Wi-Fi network.
Download the app: Find "EnergySilence" App on Google Play or on the APP Store.
If this is your first time using the app, you'll need to create an account, otherwise sign in with
your existent account.
Once inside the app, click on the "+" in the upper right corner and look for your TotalPure 3in1.
Once you have selected your device, press the power button for 5 seconds (it will beep
three times) when an "F" appears and flashes. Press "confirm" to continue. Select your Wi-Fi
network and enter the password. Press "confirm".
The app will automatically connect to your device. In case the automatic connection fails,
press the power button until "F" flashes slowly to start the manual linking. After this,
introduce the password to your Wi-Fi network and search for "TotalPure 3in1's Wi-Fi. Pair it
and go back to the app to finish the linking.

5. CLEANING AND MAINTENANCE

Turn off and unplug the device from the power supply before cleaning or storing it.
Do not wet or allow water to come inside the device.
Use a soft, damp cloth to clean the device's surface. If a deeper cleaning is required, dilute
38 TOTALPURE 3IN1 CONNECTED MAX
mild detergent in water and wipe it with a soft cloth.
Do not use chemical or harsh abrasive cleaning agents.
Air inlet/outlet
Use a soft brush or a vacuum cleaner to clean the dust in the air inlet and outlet. Clean it
regularly in order to prevent too much dust from accumulating.
Too much dust will reduce product efficiency.
Remote control
Gently wipe the surface of the remote with a soft, dry cloth.
If it is not to be used for a long time, avoid battery consumption. Remove the batteries inside
the remote control.
Storage
Fig. 19.
If the device is not going to be used for a long time, clean it and place it in a plastic bag.
Store the device in a safe, fry place when not used for a long time.
Avoid storing it in places with vibrations or other electrical appliances.
Avoid storing it where it is exposed to direct sunlight, high temperatures or humidity.
Keep out the reach of children.

6. TECHNICAL SPECIFICATIONS

Product: TotalPure 3in1 Connected Max
Product reference: 05299
220-249 V~, 50/60 Hz
Rated power: 2000 W
Cooling power: 45 W
Oscillating angle: 80º
Wi-Fi frequency band: 2.412~2.484 GHz
Maximum Wi-Fi emission power: +20 dBm
ENGLISH
TOTALPURE 3IN1 CONNECTED MAX 39