Inserting The Containers For Oil And Uv Additive - Waeco AirConServiceCenter Bedienungsanleitung

VAS6746B
4. Press ENTER to confirm.
5. Enter the password "7388".
6. Use the keypad and the cursor keys to enter the information.
7. Press ENTER to confirm.
8. Press STOP to access the standby menu.
7.7

Inserting the containers for oil and UV additive

The current supply quantities are displayed in the standby menu.
1. Open the cover flap (21) on the left side and push the containers into
the snap locks:
– Container for fresh oil (18)
– Container for UV additive (19) and
– Drained oil receptacle (20)
2. Close the cover flap (21).
3. Enter the container size for fresh oil and UV contrast agent (see
chapter "Entering the container size" on page 74).
EN
Initial start-up
18
19
20
21
73