Inserting The Containers For Oil And Uv Additive - Waeco AirConServiceCenter ASC 1300 G Bedienungsanleitung

Initial start-up
7.7

Inserting the containers for oil and UV additive

The current supply quantities are displayed in the standby menu.
1. Open the cover flap (20) on the left side and push the containers into
the snap locks:
– Container for fresh oil (17)
– Container for UV additive (18) and
– Drained oil receptacle (19)
2. Close the cover flap (20).
3. Enter the container size for fresh oil and UV contrast agent (see
chapter "Entering the container size (for ASC 2300 G/ASC 3300 G
only)" on page 97).
96
17
18
19
20
AirCon Service Center
EN