Connections - Denon DHT-M330DV Bedienungsanleitung

5 CONNECTIONS

• Do not plug in the AC cord until all connections have been
completed.
• Be sure to connect the left and right channels properly (left with
left, right with right).
• Insert the plugs securely. Incomplete connections will result in
the generation of noise.
(1) Speaker system connections
• When connecting, use connection cords A and B included with the DHT-M330DV. The connection cords are color-coded by different colored
plugs and labels. Connect in such a way that the colors are the same as the AV surround receiver's speaker terminals.
• Connect the side of the included connection cord with the colored label to the "+" (plus) side.
FRONT SPEAKER-R
(SC-AM330)
AV SURROUND RECEIVER
(AVR-M330)
SURROUND SPEAKER R
[ Description of speaker label ]
White Red Blue Gray
CENTER SPEAKER
FR
Red
Gray
SR
(SC-AM330)
• Use connection cords of the
colors corresponding to the
position of speaker installation,
and connect to the AV surround
amplifier.
• Note that binding pin plug cords together with AC cords or placing
them near a power transformer will result in generating hum or
other noise.
• Noise or humming may be generated if a connected audio
equipment is used independently without turning the power of
this unit on. If this happens, turn on the power of the this unit.
(SC-CM330)
C
Green
Cord B (3m)
Cord A (10m) Cord B (3m)
Purple
SW
SUBWOOFER
(DSW-M330)
Precautions when connecting speakers
If a speaker is placed near a TV video monitor, the colors on the
screen may be disturbed by the speaker's magnetism. If this
should happen, move the speaker away to a position where it does
not have this effect.
FRONT SPEAKER-L
(SC-AM330)
FL
White
Cord B (3m)
Cord A (10m)
Blue
SL
SURROUND SPEAKER L
(SC-AM330)
ENGLISH
7