Technical Data - Scheppach RT450 Original Bedienungsanleitung

23 Do not use the grass trimmer with a damaged or
excessively worn cutting system.
24 Check your surroundings and take note of any
potential dangers which you may not be able hear
due to the machine's noise.
25 Never try to work with an incomplete machine or
a machine with unapproved modifications.
26 It is advisable not to use the grass trimmer when
other persons, and particularly children, are
nearby.
27 Children are not allowed to use the grass trimmer.
28 The machine may exceed 85 db (A) at the work-
place. The operator will require noise protection
measures and ear muffs if this is the case.
29 Always ensure that all the handles and safety
equipment is fitted when the grass trimmer is in
use.
30 This equipment is not designed to be used by
people (including children) with limited physical,
sensory or mental capacities or those with no
experience and/or knowledge unless they are su-
pervised by a person who is responsible for their
safety or they have received instructions from
such a person in how to use the equipment safely.
Children must always be supervised in order to
ensure that they do not play with the equipment.
Do not lose this safety information.
Residual risks
The machine has been built using modern technology
and in accordance with recognized safety rules.
Some hazards, however, may still remain.
• Risk of injury to fingers and hands from the tool in
operation during improper use.
• Electrical hazards when unsuitable electric con-
nections are used.
• Safety hazard from the grass trimmer in case of
loose clothing; Wear personal protective equip-
ment such as tight work clothing.
• Although having regarded all considerable rules
there may still remain not obvious remaining haz-
rds.
• Minimize remaining hazards by following the in-
structions in "Safety Rules", "Use only as author-
ized" and in the entire operating manual.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

6. Technical data

Cutting width
Engine speed max
Cutting string length/both sides
Spool of string
Engine
Engine output
Weight
Subject to technical changes!
Information concerning noise emission measured ac-
cording to relevant standards:
Sound pressure L = 73,05 dB(A)
pA
Sound power L = 93,05 dB(A)
WA
Uncertainty K = 1,03 dB(A)
PA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration A = 5,035 m/s
2
hv
Uncertainty K = 1,5 m/s
2
PA
The specified vibration value was established in ac-
cordance with a standardized testing method. It may
change according to how the electric equipment is
used and may exceed the specified value in excep-
tional circumstances.
The specified vibration value can be used to compare
the equipment with other electric powertools.
Warning!
The specified vibration value was established in ac-
cordance with a standardized testing method. It may
change according to how the electric equipment is
used and may exceed the specified value in excep-
tional circumstances. The specified vibration value
can be used to compare the equipment with other
electric power tools. The specified vibration value
can be used for initial assessment of a harmful effect.
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves.
In these operating instructions we have marked
the places that have to do with your safety with
this sign: m
280 mm
9500 min
-1
4/8 m
1,6 mm
220-240~ / 50 Hz
450 W
2,4 kg
GB | 23