Mercedes-Benz Seat covers Montageanleitung Seite 9

10
4
8. Move the driver's seat approx. 2 in (5 cm) towards
the rear. Please refer to the vehicle Owner's Manual.
9. Open the snap fastener (9).
10. Pull the seat cover (1) over the seat cushion,
straighten it, and push the seat cover (1) with the
loops (10) between the seat backrest and the seat
cushion.
11. Move the driver's seat as far to the front as
possible. Please refer to the vehicle Owner's Manual.
12. Thread the hooks (4) into the loops (10).
Important
Make sure that no cables, tubing or hoses are
caught and/or damaged while the hooks are being
clipped.
13. Clip the hooks (4) into the wiring under the seat
cushion.
4
1
14. Close the snap fastener (9).
15. Slide the head restraint upwards as far as it will go.
16. Pull the seat cover (5) over the head restraint,
straighten it, and adjust the head restraint.
- 6 -
10
9
5
M+P-03F-5306
M+P-03F-5307