Using The Vacuum Cleaner - Concept VP9211 Bedienungsanleitung

EN
2. Inserting the metallic telescopic tube into the hose adapter
Place the metallic telescopic tube on the hose adapter and turn
slightly.
3. Extending the metallic telescopic tube
Press the plastic latch and extend the smaller tube outwards.
4. Putting the floor nozzle on the telescopic tube
Insert the telescopic tube into the floor nozzle and turn slightly.
Flap – allows changing between brushing for flat floors and smooth
vacuuming for carpets (see Fig. 3).
ACCESSORIES
1. Slotted adapter
The combined slotted adapter is designed for vacuuming areas with difficult access, such as heating bodies, slots,
corners, pedestals, spaces between upholstery, and so on.
2. Nozzle with a brush for upholstery
Prior to installing, use the rotary handle to select whether the nozzle will be used for upholstery or as a brush. This
nozzle is designed for furniture, upholstery, books, lamps, and so on.
3. Brush for wooden floors (depending on the vacuum cleaner type)
This brush is made of hair bristles and is designed for vacuuming wooden and sprung floors.
4. Air turbo brush (depending on the vacuum cleaner type)
This brush improves the vacuuming efficiency through combing and a better collection of impurities.
1

USING THE VACUUM CLEANER

NOTE
Prior to using the vacuum cleaner please make sure that the filters and the dust bag have been installed properly.
Unwind the necessary length of the power cord and insert the plug into the mains outlet. The ideal length of the power
cord is marked by a yellow dot on the cord. Do not unwind the power cord past the red mark
VP9211, VP9212
2
(Fig. 2)
(Fig. 3)
3 4
33